Embraer Legacy 600 Virtual Tour: Range Map, Live Flight Screens and a Hidden Item Hunt
A bespoke 360 virtual tour of an Embraer Legacy 600 private jet: day and night cabins, a range map for 36 airports, live flight screens on the bulkheads, eight hidden items to find and a seat planner for the party.
The Embraer Legacy 600 is a 13-seat business jet with a range of up to 3,450 nautical miles. We photographed it in a single day in a pre-lit hangar, for a client who needed a polished tour to sell it to UK and international customers, and the tour now has an interface designed around the aircraft itself: a boarding pass at the door, a cabin plan to move through, a map that shows where it can fly, live flight screens on the cabin bulkheads, eight items to find and a seat planner for the party.
It is one of our bespoke 360 virtual tours, built for the private jet and aircraft sector. The tour is deliberately unbranded, so it works for whoever is selling or chartering the aircraft. Below we walk through each feature and the reason it is there.

A boarding pass instead of a start button
The tour opens on a boarding pass: “Step aboard a 13-seat business jet, set up for the day and made up for the night.” The details on it are the details a buyer or charterer cares about: from wherever you are, up to 3,450 nm away, six cabin areas, up to 13 seats, day and night settings, and a seat number, 1A. “Board now” starts the tour, and “Where can it fly?” goes straight to the range map for a visitor who has a destination in mind. Accessibility settings and a full text version are one click away from the first screen.
A cabin plan to move through the aircraft
A plan of the aircraft sits at the foot of every scene, with the six areas laid out nose to tail: the galley and entrance, the flight deck, the forward club, the dining club, the divan lounge and the washroom and baggage area. Tapping an area takes the visitor there, previous and next buttons step along the aircraft, and a play button runs a walk-through from nose to tail for anyone who would rather watch. Hotspots inside each scene explain what a visitor is looking at, from the airstair door and galley to the seats that become beds, the seat controls, the bulkhead screens and the dining set-up.

Day and night, with a window shade
Both configurations were photographed, and the visitor switches between them with a window shade at the top of the screen. Pull it down and the cabin changes to its night set-up, with the seats made up as beds, and a seatbelt chime sounds as it does. The cabin plan changes with it, showing day seating or night beds. It is a small interaction, but it is the one that shows a buyer what the aircraft is like on a long overnight sector, which a single set of photographs cannot do.

Where can it take you? The range explorer
This is the feature that turns a spec sheet into something a visitor can play with. The range explorer is a dotted world map with the aircraft’s range drawn on it from the chosen airport. The shape is coloured by what is achievable: non-stop, non-stop if the wind permits, or needing a fuel stop. A “Fly from” selector offers 36 airports, with London Farnborough as the default and quick buttons for London, Paris, Geneva, Dubai, Hong Kong, New York and Los Angeles.
A passengers control changes the answer. With 8 on board the non-stop range is 3,450 nm, and with all 13 seats taken it falls to 3,050 nm, so the map redraws as the number changes. The tour also notes that with more than six on board the cabin cannot be made up for sleeping. Beside the map is a list of destinations sorted by distance, each with its status, so a visitor can see at a glance that Paris is 186 nm and non-stop, that New York is non-stop with the wind permitting, and that Los Angeles needs a fuel stop. Choosing a destination draws the route and gives the journey time, with the time on the ground for any stop included, and a swap button reverses the journey.


Fly it: moving flight screens in the cabin
Once a visitor has chosen a destination, “Fly it” starts the flight. The bulkhead screens in the cabin photographs come to life with a moving map: the plane tracks along the route, and distance to go, ground speed, altitude and outside temperature update as it goes. A flight panel keeps the same figures to hand, with time to go counting down, the local time at the destination, altitude (41,000 ft), ground speed (around 450 kt), a progress bar, pause, sound and “End flight” controls.
Visitors are not held on the map while the flight runs. They can keep looking around the cabin and moving between areas while the flight runs, with an in-flight soundscape underneath if they have sound on. For a prospective buyer it is a believable picture of the aircraft in use, and it is the moment a still tour becomes a time-based experience.

Hidden on board: stamps and badges
The passport is the tour’s game. Eight things are hidden around the cabin, by day and by night, and the visitor finds them by clicking them in the panoramas. Each one has a written clue, such as “Safety first, right up front where the pilots sit” or “Something sparkles above the galley counter”, and a counter in the toolbar shows how many have been found, starting at 0 of 8. One is only there at night, a breakfast tray that has been left in the dining club, so a visitor who has stayed in the day set-up has not finished.
A clue can be too hard, so every one has a “Show me” button that takes the visitor to the right scene and puts a pulsing ring around the item, labelled “Here it is”. Finding an item earns a stamp, a chime and a short message, and seven badges reward wider exploring: Captain for stepping onto the flight deck, Day tripper for visiting every area by day, Night owl for every area at night, Eagle eye for finding all eight items, Route planner for looking up five different destinations, Wheels up for flying a route from start to finish and Full house for seating all 13 guests. A name can be added to the boarding pass, which can then be downloaded.


Seat your party
“Who sits where?” is a seat and bed plan of the cabin. The visitor adds the names of their guests and taps a seat, or drags a name onto one, with a switch between day seating and night beds. “Fill every seat” seats a full cabin in one go and “Clear the cabin” starts again. It is marked as an indicative layout drawn from the photographs, and it makes a visitor imagine the aircraft with their own family, team or clients on it, which is much of what a sale depends on.

Aircraft at a glance
For the buyer who wants the numbers, one panel gives the aircraft at a glance: up to 13 passengers in three cabin sections, a range of 3,450 nm with 8 passengers (3,050 nm with 13), a cruise speed of Mach 0.78 (447 knots at 41,000 ft), a ceiling of 41,000 ft, a cabin 42 ft 6 in long, 6 ft 11 in wide and 6 ft high, 286 cu ft of baggage space, two Rolls-Royce AE 3007A1E engines and a maximum take-off weight of 49,604 lb. The panel says plainly that these are published figures for the Legacy 600 type and that each aircraft differs, so the operator confirms the details for any flight. A button goes straight from the figures to the range map.

Sound, accessibility and phones
Sound is a choice. Cabin sounds (the chime when an item is found, the seatbelt chime on the window shade and the in-flight soundscape) can be turned on and off, with a separate setting for a soft engine hum. The help panel also offers a high contrast mode, larger hotspots and a reduce motion setting, lists the keyboard controls (arrows to look around, [ and ] to move between areas, N for day and night, R for the range map, S for the specifications, P for the passport and Esc to close a panel) and links to the text version of the whole tour. The layout adapts to phones, with the boarding pass stacking and the range map sitting above the destinations list, so the same features work in a visitor’s hand.

Photographing a private jet
None of this works without a strong set of panoramas. The shoot lasted just a day, and we worked with the ground team and catering contractors to prepare the aircraft. Lighting was the key factor, so we shot the Legacy inside a pre-lit hangar and used smaller hand-held LED rigs to light the darker parts of the cabin. Both day and night configurations were photographed, and in post-production we removed every camera reflection from the cabin and inserted a custom-shot 360 degree aerial image into each window, giving the impression that the aircraft is in flight.

Why we built it this way
A private jet is a considered purchase or charter, and the people looking at it are often looking at several. A tour that is only a set of panoramas gives them a quick look and sends them on. This one gives them reasons to stay and use the aircraft: to plan a trip they might really take, to see their own party on board, and to find the eighth item. We explain the thinking behind that in our guide to gamifying virtual tours.
Like every bespoke tour, it is hosted by us with no yearly fee, and the optional CMS can be added so the text can be updated without us. If you operate, broker or manufacture aircraft and want a tour that does more than show the cabin, talk to us about an aircraft virtual tour. Every tour is quoted on the plan, with no travel charges in mainland UK.
Want a tour like this for your site?
Tell us about your site, what the tour is for and who it needs to reach, and we will reply with ideas and a clear price.
- Designed around your branding
- Built to WCAG 2.2 AA
- No obligation
Our most recent bespoke 360 tours
Woldingham School Virtual Tour: Aerial Entry and Plan My Visit
Schneider Electric Leeds: Ringmaster Production Line Virtual Factory Tour
St Peter’s School York: 45-Space Virtual Tour with Campus Map
Tell us about your building
A clear price, no travel charges anywhere in mainland UK, and a named contact from first call to launch.



